The Alimak raising method consists of five steps, which together make up a cycle. The five steps are all dependent on the Raise Climber, which. ALIMAK INC. – Alimak Raise Climber. Operating height (m): . Operating width (m): Platform dimensions: m x m. Maximum length. In underground mining, a raise refers to a vertical or inclined excavation that leads from one level, or drift, to another. A raise may also extend to surface. There are four excavation methods for raises: Conventional or open raise; Long- hole or drop raise; Alimak · Raise boring.
|Published (Last):||12 October 2014|
|PDF File Size:||5.75 Mb|
|ePub File Size:||2.5 Mb|
|Price:||Free* [*Free Regsitration Required]|
Two parallel pressure shafts of metres. Inclined pressure shafts totalling It runs on a guide rail anchored to the hanging wall. FAQ Frequently asked questions Display options. The change in geometry and improvement in ground support allows stope heights in the order of 75 to metres, raisee many sub-levels and their associated development.
Alimak Hek sells Raise Climber business
The graph abscissa see above figure is the hydraulic radius of the stope. How It Works The Alimak method raises between levels in a safe and effective manner.
Most of the rest of the development is in ore see centerfold. The nest will be slashed out of the drawpoint backs if development is from the hangingwall side. There are several alimaj, which include: The holes are most often mechanically loaded with either ANFO or an emulsion explosive.
Alimak Hek sells Raise Climber business | News |
We have a solid reputation when it comes to employing the safest and most productive techniques available. Cables can be installed right up the middle of the hangingwall, where they will do the most good. The production drill sits in the middle of its work, cutting the drilled length in half. We can assist you with all your underground mining requirements. The Alimak Mining Method Raise Climber Mining Conditions This type of mining is best suited to tabular narrow vein ore bodies with enough dip for gravity ore flow.
Faster Access to Undeveloped Ore Once the climber nests are established, ore starts to flow. Stope stability decreases with increasing hydraulic radius, so it can be deduced that a long thin opening will be more stable than a squat opening of the same area, with all else remaining equal.
Specialists in Alimak Raising
Gallery Click on the photos below for a climbrr view: Boxholes, raises at degrees and ore passes. This should also contribute to a more stable hangingwall.
With some exceptions, production blasting can start in the quarter after raise development starts. Where required, the stope hangingwall can be supported with deformed strand resin-grouted cable bolts in a regular pattern along the raise. Ground Control Experience alomak shown that the stopes mined with a raise climber tend to be more stable than regular longhole open stopes.
The Raise Climber serves both as working platform and as a means of transport up to the work face. The drifts are commonly sized to accommodate the large scooptrams alimmak for production mucking and are often driven with jumbos.
This type of mining is best suited to tabular narrow vein ore bodies with enough dip for gravity ore flow. More Selectivity The short drill holes make this method very effective in narrow veins. Less Development The bulk of the waste development required with this method is the ore zone access and the raise climber nests. A ramp is not required and, in many cases, neither is the muck pass and ventilation raise of a regular stoping system.
China rock climber China stepper climber China inflatable climber. Contact Us For more information on Manroc’s Alimak raising services, please contact us. For more information on our Alimak production mining services, please contact us.
The graph is divided into areas that have been delineated by observed stope behaviour. Fill fence and piping if required. Mining Equipment and Tools. This alimai is often required where rock fill is used. Loading is also done from the platform. The climbers require about 4. With better ground control, larger stopes can be taken. The blasts coimber timed to slash down, with the footwall holes often the last to fire. Drilling, loading and blasting are all performed from the platform of the Raise Climber, which is adapted to fit the precise dimensions and shape of the raise.
Alimak Production Mining, Manroc Developments Inc.
Raise Mining Raise mining is a “longhole” method of bulk mining tabular narrow vein ore bodies. After the raise is driven it often must be rehabilitated, subject to ground conditions, for the safety of production crews. The graph ordinate is an clinber of the rock stability and includes factors for block size, joint surface condition, rock strength, joint orientation and the effect of gravity.
In which subject field? In theory, and if properly cabled, the foliated hangingwall could be approximated as a laminate beam by the Voussoir approach, as described by Hutchinson and Diederichs Alimak Raise Climbers and shaft enlarging equipment are available for underground mining, civil engineering and hydro-electric power generation as well as for operating as inter-level service lifts.
Cllimber is better if the ore body is continuous over several hundred feet vertically. There are several explanations, which include:.
Backfill Fill fence and piping cljmber required. It is safest to take a few rings per blast, so that miss-holes or other blasting problems are accessible for correction. The Alimak method yields high tonnage and low dilution results, while reducing mining costs.
Manroc routinely applies rigorous maintenance programs and checks on all our Alimak equipment ensuring the safety of all individuals. The platform can be any shape and size.