Construction. FUNKE brazed plate heat exchangers are made of cor- rugated stainless steel plates. The plates are assembled in a ° angle to each other. FUNKE brazed plate heat exchangers series TPL is basically made of non- corrugated stainless steel plates. In the flow gaps special stainless steel turbulence. User instructions. These instructions relate to the standard versions of the brazed FUNKE plate heat exchanger (PWT). Supplementary operating and.
|Published (Last):||12 January 2018|
|PDF File Size:||8.46 Mb|
|ePub File Size:||17.68 Mb|
|Price:||Free* [*Free Regsitration Required]|
Each plate is provided with tpo gasket, which seals the flow gaps to atmosphere and the media from one another. Be the first to review!
Product Details The exceptionally high heat transfer performance is achieved by means of diagonal media flow as well as special turbulence plates inserted into the flow gaps, a technology developed and produced exclusively by FUNKE.
The heat-exchanging surface of these units is between 0.
The added advantage is a smaller overall sizing and lower cost due to a higher achieved ratio of heat load to mass. The TPL is particularly well suited to flow media with average to high viscosity. Single pass and multi-pass funie are standard with a surface area of up m2 in one unit. Port connections can be supplied to client requirements. In the event of plate fouling the FPS is fully serviceable and PHE can be readily dismantled for cleaning without disturbance of interconnecting piping.
These types of plate heat exchangers do not use gaskets and undergo a tp quality inspection programme, including pressure and leak-tests to ensure absolute leak tightness. From Plate Heat Exchangers. Small sizes with low space requirements are possible for media with higher viscosity fuhke to the high heat transfer of the powerful TPL.
Standard connections include threaded socket or nipple, metal lining and flanged connections. Another advantage of the TPL is its high resilience, as the surface tl makes it possible to achieve a significantly higher level of safety under stress compared to the spot soldering used funie conventional brazed plate heat exchangers.
Other standard product types such as shell and tubes and air blast oil coolers are held in semi stock and are assembled to individual requirements and despatched within working days.
Product Details – Industry Mall – Siemens USA
Pure counter flow is employed to achieve maximum possible heat transfer. TPL satisfy the high demands in this area with regard to reliability and thermodynamic efficiency — and can be designed with the utmost flexibly! Given optimal operating conditions the BHE is practically maintenance free. The BHE consists of embossed stainless steel plates, fitted into one another and vacuum brazed with copper or nickel solders to form a compact and pressure-tight unit.
Stress conditions in the heat exchanger caused by differences in pressure or temperature, for example, can be absorbed significantly better thanks to the surface soldering of the TPL. For example, should a design specification dictate a too small FPS selection the problem can be rectified on site with minimal down times – simply by adding a proportionate amount of plates at marginal cost. Technical Data Heat exchange surface per plate: The TPL Series utilizes additional turbulator plates in the flow gaps and increased flow gaps compared to other plate types.
Each individual flow channel can be adapted to the specific application thanks to the modular design of the TPL. Air Tunke Heat Exchangers. A leak funle hole in the gasket signals leakage to atmosphere. Two pressure plates clamp this package together with tie rods.
Gfor extremely corrosive media titanium is available.
The plate package is mounted in a rack consisting of a fixed number of plates. Download enquiry form for Plate Heat Exchanger.
OIL COOLER TPL 00-L-18-12 FUNKE
During assembly every second unit is rotated degrees to form two separate flow gaps that act as turbulators ensuring a highly turbulent flow which enables the most effective heat transfer and reduces the risk of fouling to a minimum. We keep a large assortment of plates in stock and can deliver nation-wide within short periods.
Frigotherm represents Funke Heat Exchangers Germany in South Africa, which permits us to supply any type of plate heat exchangers. TPL can be used universally with different media. The optional extended end plates also facilitate the installation of the already very compact units.
Brazed heat exchangers
The exceptionally high heat transfer performance is achieved by means of diagonal media flow as well as special turbulence plates inserted into the flow gaps, a technology developed and produced exclusively by FUNKE. Originally developed specifically for applications such as cooling hydraulic and motor oil, TPL brazed plate heat exchangers are also ideally suited and deployable for other application processes in mechanical and plant engineering. Material of plates St.
The turbulence plates are available in different versions, making the technical design very flexible. GAlternative material for special applications is available on request.
Normally consisting of two halves, fastened to the Heat exchanger with straps or tensions bolts. Individual plates are brazed together rather than bolted. Limiting condition of operation: The major advantage of bolted type heat exchanger is its ability to expand or reduce surface area according to varying heat load conditions. All plates are provided with a double gasket at inlet and outlet, which prevents mixing of media.